Figures are for the base model. All models in this family are listed below.
A bench-scale ball mill for the mine laboratory: it grinds a sample of ore down to a size the assay bench can work with. Four drum sizes cover a 40–150 kg batch, all on the same 3 kW drive.
Assaying a vein means reducing a sample to powder without contaminating it and without losing the coarse fraction, and it has to be repeatable so two samples can be compared. A small drum mill does that in one step: charge the sample with the balls, run it for a set time, empty it, and the product is ready for the next stage. The mill is small enough to stand in a lab, runs on single-phase site power at 3 kW, and has no settings to tune beyond the running time.
The one control that matters is how long the drum turns. Longer grinding gives a finer product; shorter grinding stops while the sample still has grit in it. Because the drum speed and the ball charge are fixed by the model, running time is the repeatable variable, and a laboratory can write a time into its procedure for each ore type and get the same result every time.
A 3 kW motor drives the drum through a V-belt and a gear reduction. The drum turns on trunnion bearings in the two bearing pedestals at either end of the base frame. Inside, the steel balls tumble and fall onto the sample as the drum rotates, breaking it by impact and attrition. The drum is charged and emptied through the opening under the clamped lid on top, which is held down by the bar and the studs seen on the frame.
Batch capacity is the raw material per run, from 40–50 kg on the 300×500 up to 120–150 kg on the 600×900; ball charge runs from 60 kg to 260 kg on the same models. Recommended ball sizes are 30, 50 and 70 mm; the exact mix for a given ore is left to the customer to work out from their own feed, since the right blend depends on the sample's size distribution and hardness.
Model numbers give the drum size in millimetres — 300×500 is a 300 mm diameter by 500 mm long drum. Packing size is the crate dimension, and gross weight includes the balls. Technical parameters are subject to change without further notice.
| Parameter | 300×500 | 400×600 | 500×800 | 600×900 |
|---|---|---|---|---|
| Power (kW) | 3 | 3 | 3 | 3 |
| Batch capacity (kg) | 40–50 | 60–70 | 80–100 | 120–150 |
| Ball charge (kg) | 60 | 100 | 150–180 | 260 |
| Packing size L×W×H (mm) | 1250×680×930 | 1300×700×1000 | 1500×800×1000 | 1600×800×1100 |
| Gross weight incl. balls (kg) | 270 | 350 | 500 | 640 |
Swipe the table sideways to see every column →
Sample Crushers, Pulverizers & Lab Mills5 models
Flotation & Gravity Test Machines5 models
Assay & Analysis Instruments5 models