Figures are for the base model. All models in this family are listed below.
A small jaw crusher and a vibrating screen built onto one wheeled chassis. The jaw reduces the rock, the screen sorts the product into grades, and each grade leaves by its own chute — so the machine delivers sized material in one pass instead of crushed-all-in.
In a mine laboratory it is the tool for looking at feed size against grinding: crush a sample, screen it into fractions, then grind each fraction separately and compare the result. That is how the effect of feed size on mill efficiency gets measured instead of guessed, and it is the usual reason a laboratory wants a screen next to a crusher rather than a crusher alone.
In production it is a small aggregate plant. Building stone, road base and concrete aggregate are graded material, and this chassis turns rubble into two or three grades at a small site without a static plant.
The screen can carry up to three decks, and the cut size of each deck is made to order — so the grades that come off the chutes are set at the works to match what the customer sells. A single deck gives one product plus oversize; three decks give three grades plus oversize.
Crusher, screen, motors and chutes all sit on one steel chassis on wheels, with the screen slung on coil springs so its vibration does not shake the frame. The whole unit can be towed to a site, parked, worked, and moved again; it can also be stored under cover and loaded for shipping as one piece.
Two builds. The electric version uses the two motors in the kW column — the first figure is the jaw drive, the second the screen drive. The diesel version quotes the engine in horsepower with a 10 kW generator set: the engine drives the jaw through its belts, and the generator runs the screen motor and carries a small site load. That is what makes the machine usable at a pit with no power line to it.
Four sizes, from the 150×250 at 1.3 t to the 250×400 at 3 t. Overall size and packing size grow with the model, and the packing figure is the shipping crate, worth checking against the container or the truck that will carry it.
Capacity and maximum feed size are not part of this sheet; they follow from the jaw size and from how the discharge is set, and are confirmed per enquiry. Technical parameters are subject to change without further notice.
| Parameter | 150×250 | 200×300 | 220×350 | 250×400 |
|---|---|---|---|---|
| Overall size L×W×H (mm) | 2300×1400×2100 | 2300×1750×2300 | 2400×1400×2400 | 2700×1600×2800 |
| Packing size L×W×H (mm) | 2590×1760×1600 | 2590×1760×1690 | 2600×1760×1900 | 2800×1800×2000 |
| Weight (t) | 1.3 | 1.7 | 2.1 | 3 |
| Jaw + screen motors (kW) | 5.5 + 0.55 | 7.5 + 0.55 | 11 + 0.75 | 15 + 0.75 |
| Diesel option (HP + generator) | 18 HP + 10 kW | 25 HP + 10 kW | 28 HP + 10 kW | 36 HP + 10 kW |
Swipe the table sideways to see every column →
Jaw Crushers — PE & PEX Series13 models
HST Hydraulic Cone Crushers3 models
Symons Cone Crushers6 models