Figures are for the base model. All models in this family are listed below.
The same mobile jaw crusher — hopper, jaw, discharge conveyor and four wheels on one frame — with a diesel engine in place of the electric motor. It is the version to take where there is no reliable power line to the pit, which is the normal situation at a small mine, a remote prospect, or a laboratory that has to sample away from the plant.
No cable to run, no transformer to size, no phase problem to solve and no generator to add: the engine is on the frame, drives the crusher through V-belts, and the machine works wherever it can be towed. That makes it usable at a working face that will only be there for a season, and it can be moved to the next site without dismantling an electrical installation.
The duties are the same as the electric version. Laboratory crushing at a mine, where rock has to be reduced before assay. Small-mine production, where the tonnage does not justify a fixed plant and one machine can crush straight to a stockpile. Hard, abrasive rock such as quartz is within its range.
The discharge opening is adjustable — 25–60 mm on the PE200×300 and 15–55 mm on the PE220×350 — so the same machine can be set fine for sample work or opened up for production. Maximum feed is 210 mm and 200 mm respectively. Closing the discharge gives a finer product at lower tonnage; opening it gives more throughput at a coarser size.
The diesel engine sits on the same frame behind the crusher, coupled by belts to the flywheel, with the air cleaner and exhaust clear of the operator side. Being on wheels with its own discharge conveyor, the machine can be towed, parked and stored under cover, and loaded for shipping without a crane.
The diesel version is heavier than the electric one because of the engine — 2.3 t against 1.2 t on the PE200×300 — which matters when choosing a towing vehicle. Packing figures are the shipping crate. Technical parameters are subject to change without further notice.
| Parameter | PE200×300 | PE220×350 |
|---|---|---|
| Matched power (HP) | 15 | 11 |
| Capacity (t/h) | 20 | 8–10 |
| Weight (t) | 2.3 | 1.4 |
| Packing size L×W×H (mm) | 2600×1200×2100 | 2200×1200×1850 |
| Max. feed size (mm) | 210 | 200 |
| Discharge range (mm) | 25–60 | 15–55 |
Swipe the table sideways to see every column →
Jaw Crushers — PE & PEX Series13 models
HST Hydraulic Cone Crushers3 models
Symons Cone Crushers6 models