Figures are for the base model. All models in this family are listed below.
A jaw crusher built onto its own wheeled frame, with a feed hopper, a V-belt drive and a discharge conveyor that carries the product away from the machine. It is sized for mine laboratories that have to reduce rock before assay, and for small mines that need a working crusher without installing a fixed plant.
Laboratory crushing in any mine: a lump of quartz or vein material goes in at the hopper and comes out at a size the next stage can accept. Small-mine production: where the tonnage does not justify a static installation, one of these will crush directly to a stockpile. The jaw is built for hard, abrasive rock and handles quartz without trouble.
Everything is on one frame: crusher, motor, guard, conveyor and four wheels. It can be towed or pushed to a new position, parked, and moved again, so it does not have to be where the ore is for the life of the mine. Being on wheels also makes it easy to store under cover and to load for shipping, which matters for a machine that is bought and moved more than once.
The discharge opening is adjustable between 15 and 55 mm on both models; closing it down gives a finer product at a lower tonnage, opening it up gives more throughput and a coarser product. Maximum feed is 180 mm on the PE200×300 and 200 mm on the PE220×350, and capacity runs 4–7 t/h and 8–10 t/h respectively, so the larger machine is the one to take when the sample load is heavy or production is the main duty.
A 7.5 kW motor on the PE200×300 and an 11 kW motor on the PE220×350, driving the crusher through V-belts. The large flywheel carries the jaw through the crushing stroke, which is why a comparatively small motor can break rock of this size.
Weights are 1.2 t and 1.4 t, and the packing figures are the shipping crate. Capacity depends on the feed gradation and on how far the discharge is opened. Technical parameters are subject to change without further notice.
| Parameter | PE200×300 | PE220×350 |
|---|---|---|
| Matched power (kW) | 7.5 | 11 |
| Capacity (t/h) | 4–7 | 8–10 |
| Weight (t) | 1.2 | 1.4 |
| Packing size L×W×H (mm) | 2140×1020×1870 | 2200×1200×1850 |
| Max. feed size (mm) | 180 | 200 |
| Discharge range (mm) | 15–55 | 15–55 |
Swipe the table sideways to see every column →
Jaw Crushers — PE & PEX Series13 models
HST Hydraulic Cone Crushers3 models
Symons Cone Crushers6 models