Home / Shop / Trommel Wash

TGM Trommel & Washing System

Trommel Wash · 30–50 t/h set
TGM Trommel & Washing System

Key figures

  • Capacity (t/h)30–50
  • Diesel engine42 kW, 1,500 r/min, with clutch
  • Sand pump4 in, high-chrome alloy — 100 m³/h at 20 m head, 1,400 r/min, 4 in suction and discharge
  • Pump set baseFabricated square-steel frame

Figures are for the base model. All models in this family are listed below.

Overview

What it is

A complete small-scale alluvial gold washing set built around three stages — lift, screen and concentrate. It is supplied as one package with the pump, the trommel, the sluices and the electrical control already sized to work together.

How the set works

Frame and transport

Everything is carried on a bolted 14# square-steel frame on two Ø219 mm tube sleds. The frame is bolted rather than welded, so the set can be broken down for transport and re-erected on site.

What is included

One diesel engine and sand pump on their base frame, one buffer tank with support frame, one trommel with feed hopper and splitter, two sluice boxes, one control cabinet, one structure frame and two sled bases.

Price

Quoted per set against the required drum mesh and site layout. Freight is not included and taxes are payable by the buyer.

Site layout

3D layout. The 4 in sand pump draws from the pit at the lower left and lifts through the white pipe to the feed hopper. Screen undersize from the trommel runs down the green sluice boxes, where the gold is caught; oversize leaves at the far end of the drum.
3D layout. The 4 in sand pump draws from the pit at the lower left and lifts through the white pipe to the feed hopper. Screen undersize from the trommel runs down the green sluice boxes, where the gold is caught; oversize leaves at the far end of the drum.

All models

Parameter30–50 t/h set
Capacity (t/h)30–50
Diesel engine42 kW, 1,500 r/min, with clutch
Sand pump4 in, high-chrome alloy — 100 m³/h at 20 m head, 1,400 r/min, 4 in suction and discharge
Pump set baseFabricated square-steel frame
Buffer tank1.5 × 1 × 1 m, 5 mm steel plate, on its own support frame
Trommel5 m long, 1.2 m dia
Trommel drive7.5 kW motor, JZQ350 reducer, gear-and-chain drive
Drum3 m long, 0.82 m dia
Screening section2 m long, 1.2 m dia
Screen meshHigh-manganese steel, 10 mm aperture
Feed hopperFabricated to shape, 5 mm steel plate
SplitterDivides the feed evenly between both sluices
Sluice boxes2 sets, 8 m × 1 m, 5 mm steel plate, lined with imported gold carpet
Control cabinetPush-button control for the complete set
Structure frame5 × 1.5 × 3.5 m, 14# square steel, bolted for shipping
Sled base2 × Ø219 mm heavy-wall tube

Swipe the table sideways to see every column →

Alluvial washing set — selection questions

Answers drawn from the published specification table above.

What capacity does the TGM set handle?

The TGM set is built as a 30–50 t/h package. It is a complete three-stage set — lift, screen and concentrate — supplied with pump, trommel, sluices and control cabinet already sized to work together, rather than as separate machines you match yourself.

Can it run off-grid on a remote alluvial site?

The lift stage is independent of the grid: a 42 kW diesel engine drives the 4 in high-chrome sand pump through a clutch, delivering 100 m³/h at 20 m head. The trommel itself is turned by a 7.5 kW motor through a JZQ350 reducer, and the set ships with a push-button control cabinet — so plan the power supply for that motor and the controls when you specify the site.

What screen aperture and drum size does it use?

A 5 m long, 1.2 m diameter trommel carries a 2 m screening section with 10 mm high-manganese steel mesh. The drum feeding it is 3 m long and 0.82 m in diameter. Mesh aperture is specified against your gravel and the gold size you are chasing, so 10 mm is the standard build, not the only option.

How is the set transported and re-erected on site?

Everything is carried on a bolted 14# square-steel frame on two Ø219 mm tube sleds. The frame is bolted rather than welded, so the set can be broken down for container or flatbed transport and re-erected on site without a fabrication workshop.

What exactly is included in one set?

One diesel engine and sand pump on their base frame, one 1.5 × 1 × 1 m buffer tank with support frame, one trommel with feed hopper and splitter, two 8 m × 1 m sluice boxes lined with imported gold carpet, one control cabinet, one structure frame and two sled bases. Consumables such as carpet and mesh are quoted with the set.

How much water does the set need?

The 4 in pump moves 100 m³/h at 20 m head, and the buffer tank steadies the flow between the bank and the feed hopper. In practice the water demand is set by your pit conditions and recirculation, so send us the deposit description and we will confirm the pump configuration for it.

Related equipment

Jaw Crushers — PE & PEX Series13 modelsHST Hydraulic Cone Crushers3 modelsSymons Cone Crushers6 models
Prices are quoted per project. Tell us the ore type, the target throughput and the site power supply, and we will confirm the configuration and the delivered price.