Home / Shop / Ore Dressing

CTB Series Drum Magnetic Separators

Ore Dressing · CTB6012 — CTB1530 · 13 models
CTB Series Drum Magnetic Separators

Key figures

  • Drum dia. (mm)600
  • Drum length (mm)1200
  • Drum speed (r/min)<35
  • Feed size (mm)0–2

Figures are for the base model. All models in this family are listed below.

Overview

What it is

A drum magnetic separator pulls magnetic particles out of a flowing stream with a fixed permanent magnet inside a rotating drum. It is one of the most common units in a concentrator, and outside mining it is the standard way to take tramp iron out of a powder or a slurry.

How the drum works

The drum shell turns around a stationary magnetic assembly inside it. Pulp flows through the trough under the drum, and the magnetite and other magnetic particles are held on the shell as it passes. Non-magnetic material washes straight through and leaves as tailings. The magnetic layer rides up out of the pulp, is rinsed, and releases as the shell leaves the magnetic zone, either into a concentrate launder or off the drum face.

What it separates

Magnetite, pyrrhotite, roasted ore and ilmenite below 3 mm, as a wet separation. It is also used for iron removal from coal, non-metallic minerals and building materials, and in resource recovery, wood processing, ceramics, chemicals and food, wherever iron has to be taken out of a granular product.

Model naming

CTB plus drum diameter and drum length in centimetres: CTB6012 is a 600 mm diameter by 1200 mm long drum, CTB1530 is 1500 mm by 3000 mm. Capacity follows drum surface area, which is why the longer drum in the same diameter gives more tonnage.

Choosing a size

Start from the feed: particle size must be inside the feed range for the model — 2 mm on the CTB60 and CTB75 drums, 3 mm from CTB90 up. Then match capacity to the tonnage at the magnetic fraction you expect, since the quoted range moves with grade. Drum speed falls as the drum grows — under 35 r/min on the small drums, under 14 r/min on the CTB1530 — which keeps the peripheral speed and the residence time in the magnetic zone roughly constant.

Notes

Feed size is printed in the series sheet as 2-0 and 3-0 mm, meaning from zero up to that figure. Capacity depends on the magnetic content of the feed and on the required concentrate grade. Technical parameters are subject to change without further notice.

All models

ModelDrum dia. (mm)Drum length (mm)Drum speed (r/min)Feed size (mm)Capacity (t/h)Motor power (kW)
CTB60126001200<350–210–201.5
CTB60186001800<350–215–302.2
CTB75187501800<350–220–452.2
CTB90189001800<350–340–603
CTB90219002100<350–345–603
CTB90249002400<280–345–704
CTB101810501800<200–350–755.5
CTB102110502100<200–350–1005.5
CTB102410502400<200–360–1205.5
CTB121812001800<180–380–1405.5
CTB122412002400<180–385–1807.5
CTB123012003000<180–3100–1807.5
CTB153015003000<140–3170–28011

Swipe the table sideways to see every column →

Related equipment

80–100 t/h Mobile Dry Gold Separator1 models5–10 t/h Weathered Sand Gold Plant2 modelsSF & XJK Series Flotation Machines11 models
Prices are quoted per project. Tell us the ore type, the target throughput and the site power supply, and we will confirm the configuration and the delivered price.