Home / Shop / Ore Dressing

5–10 t/h Weathered Sand Gold Plant

Ore Dressing · Stationary — Mobile · 2 models
5–10 t/h Weathered Sand Gold Plant

Key figures

  • Capacity5–10 t/h
  • FeedingManual into the 1500 × 1500 mm hopper
  • BaseSteel structure on 30# I-beam, bolted down
  • Feed hopper1500 × 1500 mm

Figures are for the base model. All models in this family are listed below.

Overview

What it is

A compact crushing and recovery plant for weathered sand, sized for 5–10 t/h with manual feeding. Crushing, screening, gravity concentration and sluicing are built as one line, so the material is reduced and concentrated in a single pass instead of being moved between separate machines.

Process

Run-of-mine sand is shovelled or loaded into the 1500 × 1500 mm hopper. The 800 × 800 impact sand maker, driven by a 90 kW diesel engine, reduces it and discharges onto the 600 mm feed conveyor. The trommel — 1.0 m inside diameter, 1.3 m outside, 2.5 m of screen in Ø22 mm oilfield sucker rod — washes and classifies the product. Oversize goes to the sluice; the fine slurry is pumped by the 4 in pump to the 80# vertical centrifuge, which discharges its concentrate by hand.

Two builds

The stationary version sits on a 30# I-beam base and is bolted down. The mobile version uses a self-made heavy-duty trailer on 25/30# I-beam, with traction and steering and three axles on 1000# tyres, so the plant can be towed between pits.

Power

About 35 kW connected, excluding the feed water pump. The crusher has its own 90 kW diesel, and a 100 kW Yuchai generator set is supplied with oil, antifreeze and battery so the line can run off-grid.

Control

A single cabinet with Delixi or Chint switchgear controls the line. Motor wiring is included; site cable is not.

Stationary and mobile builds

Mobile build: feed hopper and 800 × 800 crusher at the left, trommel in the centre, 80# centrifuge at the right.
Mobile build: feed hopper and 800 × 800 crusher at the left, trommel in the centre, 80# centrifuge at the right.
Stationary build: the same three stages on a 30# I-beam base frame, bolted down instead of towed.
Stationary build: the same three stages on a 30# I-beam base frame, bolted down instead of towed.

All models

ParameterStationaryMobile
Capacity5–10 t/h5–10 t/h
FeedingManual into the 1500 × 1500 mm hopperManual into the 1500 × 1500 mm hopper
BaseSteel structure on 30# I-beam, bolted downSelf-made heavy-duty trailer, 25/30# I-beam, traction and steering, three axles on 12 × 1000# tyres (second-hand)
Feed hopper1500 × 1500 mm1500 × 1500 mm
Impact sand maker800 × 800800 × 800
Crusher drive90 kW diesel engine90 kW diesel engine
Trommel1.0 m ID / 1.3 m OD, 2.5 m screen, Ø22 mm oilfield sucker-rod mesh1.0 m ID / 1.3 m OD, 2.5 m screen, Ø22 mm oilfield sucker-rod mesh
Trommel motor5.5 kW5.5 kW
Centrifuge80# vertical, manual discharge, 11 kW80# vertical, manual discharge, 11 kW
Feed conveyor600 mm belt, 3 kW motorised pulley600 mm belt, 3 kW motorised pulley
Sand pump and box4 in sand pump + 15 kW motor + feed box4 in sand pump + 15 kW motor + feed box
Sluice1000 × 6000 mm, with gold carpet1000 × 6000 mm, with gold carpet
Control cabinetDelixi or Chint switchgear; cable not includedDelixi or Chint switchgear; cable not included
Generator100 kW Yuchai, supplied with oil, antifreeze and battery100 kW Yuchai, supplied with oil, antifreeze and battery
Total power≈35 kW, excluding the feed water pump≈35 kW, excluding the feed water pump

Swipe the table sideways to see every column →

Related equipment

80–100 t/h Mobile Dry Gold Separator1 modelsSF & XJK Series Flotation Machines11 modelsXB Series Agitating Vessels9 models
Prices are quoted per project. Tell us the ore type, the target throughput and the site power supply, and we will confirm the configuration and the delivered price.